LiveLive data loads in your browserSources: NOAA SWPC · NWS

Research-based review · Portable power stations

Jackery Explorer 300 v2 review: a small bedside UPS for a router, phones or a CPAP

An 8.16 lb LiFePO4 station with two AC outlets, a 12 V car port and a switchover Jackery lists at 0.01 seconds or less. It covers a night of small loads, not a refrigerator.

By PowerLockdown EditorialUpdated November 1, 20266 min readBased on manufacturer specs and published dataHow we research

DisclosureAs an Amazon Associate we earn from qualifying purchases. We may earn a commission when you buy through links on this site, at no extra cost to you. Learn more.

At a glance · Jackery Explorer 300 v2

Best for: Keeping a modem and router, phones, a lamp or a CPAP running through a short outage or one night, as a plug-in UPS that switches over on its own

Capacity
288 Wh (15 Ah / 19.2 V); not expandable
Battery
LiFePO4, 4,000 cycles to 70%+
AC output
2 × 120 V pure sine outlets; 300 W rated, 600 W surge peak
Other outputs
USB-C 100 W, USB-C 15 W, USB-A 15 W, 12 V/10 A car port
UPS
0.01 s or less (Jackery)
Recharge
Wall about 76 min to 100%; USB-C in 100 W; car about 4 h; solar up to 100 W
Weight
8.16 lb; 9.09 × 6.02 × 6.6 in
Warranty
3+2 years (manufacturer)

Verdict: A good small UPS for network gear and phones. For a CPAP it covers a night only with the humidifier off, and only after you change the energy-saving setting.

In this review

This is a research-based review, based on manufacturer specs and published data. We do not test products. Figures come from Jackery's Explorer 300 v2 product page, tech specs and FAQ, checked November 1, 2026, and from the ResMed, FDA and safety sources cited below.

Most outages are short. The ones that cause real trouble at night are the ones that knock out the internet, the phone chargers and a CPAP while everyone is asleep. The Explorer 300 v2 is built for that job: a lunchbox-size LiFePO4 battery that sits between the wall and your devices and, per Jackery, takes over in 0.01 seconds or less when the grid drops.

At 288 Wh and 300 W, it is a small-load tool. This review works out what that capacity covers, how it compares with a CPAP-specific battery, and one setting that matters for overnight use.

Who should buy it

  • Households that want the modem, router and a VoIP adapter to ride through outages without a reboot. Jackery markets the UPS for exactly that.
  • CPAP users who want a bedside backup and can sleep with the humidifier off during an outage, after checking with their DME supplier.
  • Apartment dwellers who need light, phone charging and a fan for an evening.
  • Anyone who wants a backup that is easy to carry: 8.16 lb with a folding handle.

Who should skip it

  • Anyone who needs to run a refrigerator, sump pump or microwave. 300 W of output will not start them. Look at the BLUETTI AC180 class instead.
  • Households planning for multi-day outages on solar. Solar input tops out at 100 W per Jackery, and the battery cannot be expanded.
  • CPAP users who need a heated humidifier all night. On ResMed's and Champion's figures, that needs several times this capacity.

Strengths

  • Fast UPS switchover. Jackery lists 0.01 seconds (10 ms) or less, quick enough for most network gear.
  • LiFePO4 cells. Rated for 4,000 cycles to 70%+ capacity, with a UL94V-0 flame-retardant shell per Jackery.
  • Fast recharge between outages. About 76 minutes to full from the wall, or 80% in about an hour.
  • 12 V car port at 10 A. Useful for a CPAP DC converter or 12 V cable, which skips inverter losses.
  • Continuous-output option. Jackery's energy-saving switch can be set so outputs do not shut off overnight.
  • Light. 8.16 lb, 9.09 × 6.02 × 6.6 in.

Drawbacks

  • Small capacity. 288 Wh runs a CPAP at ResMed's typical AirSense 11 power-supply figure for only about 4 hours through AC.
  • Only two AC outlets at 300 W combined.
  • Slow solar. Jackery quotes about 9.5 hours with a 40 W panel and panels up to 100 W, so solar is a top-up, not a daily refill.
  • Auto-off can catch you out. With energy saving on, Jackery says outputs shut off after 6 hours below 25 W on AC or 2 W on USB/DC.
  • Car cable not included, per Jackery's FAQ.

How it compares

The 300 v2 against a similar-size station, a CPAP-specific battery and a 1 kWh station. Figures are from each maker's page.

SpecJackery Explorer 300 v2EcoFlow RIVER 3 PlusMedistrom Pilot-24 LiteBLUETTI AC180
Capacity288 Wh286 Wh (858 Wh max)95 Wh1,152 Wh
Output300 W AC600 W AC24 V DC, 3.75 A1,800 W AC
UPS switchover10 ms or lessUnder 10 msBackup mode, no time listedNone listed
Solar inputUp to 100 W220 WNone500 W
Weight8.16 lb10.4 lb1.3 lb35.27 lb
Figures from each manufacturer's product page. Linked models have their own review.

Using it in a long outage

What 288 Wh covers

Assume about 85% of rated capacity is usable through the AC outlets after inverter losses (our planning figure, not Jackery's). That is roughly 245 Wh.

Our math: about 245 usable Wh divided by the load. ResMed's figure is the power supply's typical consumption; your machine at your pressure may draw less.
LoadWattsApproximate runtime on AC
Modem + router (label maximums)30 WAbout 8 hours
CPAP, no humidifier (Champion low end)30 WAbout 8 hours
CPAP, AirSense 11 power supply typical (ResMed)56.1 WAbout 4.4 hours
CPAP with heated humidifier (Champion high end)120 WAbout 2 hours
Small fan on low5 to 20 W12 hours or more

Using it for a CPAP

  1. 01Turn off the energy-saving auto-off, or choose the continuous-output option, before bed. A CPAP with the humidifier off can draw under 25 W, which would trigger the 6-hour shutoff.
  2. 02Turn the humidifier and heated tube off on battery. That is the biggest single way to stretch runtime.
  3. 03Prefer DC. A 12 V DC cable or the CPAP maker's approved DC converter on the 12 V car port avoids the losses of going DC to AC and back.
  4. 04Do a trial night at home with the station unplugged from the wall, and note the remaining charge in the morning.
  5. 05For more than one night, or with heat on, size up. Our best CPAP battery backup guide has the Wh math, and the Medistrom Pilot-24 Lite is the CPAP-specific option.

Using it for the internet

Plug the modem or fiber ONT and router into the two AC outlets, or into a power strip on one of them, and leave the station plugged into the wall full time. When the power drops, it takes over. Your provider's network still needs power outside your home, so a backed-up router helps only if the service itself is up. Our best battery backup for a WiFi router guide covers that limit.

Charging and storage safety

  • Jackery lists charging at 32 to 113°F and discharging at 14 to 113°F. Keep it indoors in winter outages.
  • NFPA warns that damaged lithium-ion batteries can overheat or catch fire. Stop using a unit that is swollen, cracked or hot to the touch, and recycle it.
  • If you recharge from a generator, it runs outdoors only, more than 20 feet from windows, doors and vents (CDC), with battery CO alarms inside.

Frequently asked questions

Can the Jackery Explorer 300 v2 run a CPAP all night?
With the humidifier off and a low-draw machine, about one night on our math. At ResMed's 56.1 W typical figure for the AirSense 11 power supply, about 4.4 hours through AC. Turn off the energy-saving auto-off first, and confirm with your DME supplier.
Does the Explorer 300 v2 work as a UPS?
Yes. Jackery lists a UPS response of 0.01 seconds or less when the unit is plugged into the wall and your device is on its AC outlet.
How long will it run a modem and router?
About 8 hours for a 30 W setup by our math, and often longer, because real draw is usually under the adapter label maximums.
Can I charge the Explorer 300 v2 with solar?
Yes, as a top-up. Jackery's FAQ quotes about 9.5 hours with a SolarSaga 40W panel in ideal sun and says panels up to 100 W shorten that.
Will it run a refrigerator?
No. 300 W rated output is too small to start most refrigerator compressors. A 1 kWh class station is the usual minimum for a fridge.
Did you test the Explorer 300 v2?
No. This is a research-based review, based on manufacturer specs and published data from ResMed, Champion, the FDA, CDC and NFPA. We do not test products.

Sources

  1. Jackery, Explorer 300 v2 Portable Power Station: tech specs and FAQ, checked November 1, 2026.
  2. ResMed, AirSense 11 User Guide (power supply consumption), accessed November 1, 2026.
  3. Champion Power Equipment, Generator Wattage Chart (CPAP with and without heated humidifier), accessed November 1, 2026.
  4. U.S. Food and Drug Administration, FDA Offers Tips about Medical Devices and Natural Disasters, content current as of April 16, 2024.
  5. NFPA, Lithium-Ion Battery Safety, accessed November 1, 2026.
  6. CDC, About Carbon Monoxide Poisoning, reviewed October 2026.

This is a research-based review. PowerLockdown does not test products; specs come from the manufacturer and safety guidance from the public agencies cited. See our editorial policy.

More portable power stations reviews

All reviews

Power Lockdown

Grid-down readiness for households: from a 72-hour storm outage to 90 days without the grid. Every figure links to a named, dated public source.

Sister site

As an Amazon Associate we earn from qualifying purchases. We may earn a commission when you buy through links on this site, at no extra cost to you.

Live conditions come from NOAA's Space Weather Prediction Center and the National Weather Service. Grid risk summarizes published NERC reliability assessments; outage statistics come from the U.S. Energy Information Administration; safety guidance comes from Ready.gov (FEMA), CDC, CPSC and FDA. This site is not affiliated with any government agency or utility. General information only, not professional safety, medical or electrical advice.

PowerLockdown · powerlockdown.comIndependent publisher · Not affiliated with any government agency